I Know You Rider | 1982-04-14 | Grateful Dead

2:20:21
Taper:
See info file
Transferrer:
DTS mix by PLS
SHNID:
gd1982-04-14.dts.griesman.76504.sbeok.flac
Source:
See info file
Lineage:
See info file
Taper Notes:
View NotesDTS-Audio-CD 5.1 Mix Track Data:

___________________________________________________________

Tech Notes

SHN's were decoded to wav and SF 7.0 was used to reassemble 
the tracks back to 1 long wave. Adobe Audition 1.5 was used 
to align and synch the SBD and AUD sources.  SF 7.0 used to 
adjust the volume for the SBD, FOB, center & LFE channels. 
Surcode CDPro DTS was used to encode to DTS. An MTX version
was made using Adobe Audition 1.5 (w/o ctr & sub channels).

- Mixed by pls
- FLAC conversion 7-1-2005 

___________________________________________________________

DTS-Audio-CD Info
___________________________________
Front  	
Left Channel:  SBD 
Right Channel: SBD 
___________________________________
Center 	
AUD Mixed to mono -5db 
___________________________________
Surround 
Left Channel:  AUD
Right Channel: AUD
___________________________________
Sub/LFE	
SBD mixed to Mono at full strength
eq'd to 

020 hz -1.5
028 hz -1.0
040 hz +0.3
056 hz +0.9
080 hz +3.0
113 hz +5.6
160 hz +8.4
225 hz +4.4
320 hz +1.3

Both sources were light on Phil &
it was not easy to bring him up
without getting Billy's kick too
dominate. 
___________________________________
Center

AUD mixed to Mono at -5 db

I think this choice works better
than using the SBD. Keeps clarity
up front and seems to smooth out
the balance during between song 
chatter.
___________________________________

More On DTS

Today's audio standards are moving toward multi-channel 
sound, like DTS and Dolby Digital. While the Audio - CD 
standard (Red Book) hasn't changed to accommodate these 
new sound formats, it's still possible to go around the 
specification and to put a 5.10 surround recording on a 
regular Audio - CD. To play a DTS - Audio - CD you must 
connect your DVD/CD player via a digital cable (optical 
or coaxial) to your DTS Dolby - Digital receiver. It is 
not 100% sure that your receiver will recognize a DTS -
Audio CD, so the first time you're trying to playback a 
DTS-Audio-CD you must do a test to determine if it can. 
Begin with volume very low, play the disc and raise the 
volume gradually.NEVER listen to a DTS-Audio-CD through 
the analog audio outputs of your CD/DVD player.

Burning Instructions: 

burn them the same way you would burn any normal Audio
CD from .shn files.
_________________________