Truckin' | 2018-07-20 | Phil Lesh and Friends

View Notes** Support taper friendly bands and venues**
Location: @BOB/DFC/mics@11'
Source: MBHO603/ka200(ortf)->V3(24/48)->Tascam DR680 + AKG 460/ck63(din) + AKG SE300B/ck92(center blend)->Tascam DR680(Busman Mod)
Transfer: SDEC10->Cakewalk SonarLE v4.0.1 (mixdown)->Sony Sound Forge 11 (track, fades & iZotope MBIT+ dither/64-Bit SRC resample)->TLH (flac@8/ffp)  

Recorded, transferred and seeded by B Crupi

Taper: Steven Weld

2:13:10

Taper:

paf2018-07-20.143011.neumann_km150.sunboy.flac24

Source:

Location: box just behind mixer enclosure, "OTS", 10 ft left of ctr. Mic config: 8" stereo bar, Rycote INV-6 shocks, DPA UA0896 screens, Large Manfrotto air-cushioned stand @ 11ft(bungee/taped to rail) ~ Source: Neumann KM 150's>GAKables xlr>Lunatec V2>GAKables xlr>Apogee Mini-Me@24/48>AES/EBU>Sound Devices 722 @24bit/48kHz

Lineage:

Transfer,editing,mastering & conversion: Sound Devices 722 master file @24bit/48kHz>firewire>Sound Forge Pro 12.1>CD Wave v1.98(tracking)>FLAC24 via TLH v2.7.0(level 8), tag w/Tag Scanner6.0.30, ffp & md5-TLH

Taper Notes:

View NotesNotes: ~ S.F. 12 (normalize to 0.08db, fades) ~
~ Apogee - soft limit on ~
~ Recording, transfer, editing, mastering & conversion by Steven Weld ~
~ Many Thanks to Phil Lesh TFB & crew & the venue crew & security for allowing us to record and share the music ~

Taper: Bob Crupi

pltfb2018-07-20.mbhoka200.v3.flac16

Source:

MBHO603/ka200(ortf)->V3(24/48)->Tascam DR680

Lineage:

SDEC10->Sony Sound Forge 11 (track, fades & iZotope MBIT+ dither/64-Bit SRC resample)->TLH (flac@8/ffp)

Taper Notes:

View Notes** Support Taper Friendly Bands and Venues**

Location: @BOB/DFC/mics@11'
Source: MBHO603/ka200(ortf)->V3(24/48)->Tascam DR680
Transfer: SDEC10->Sony Sound Forge 11 (track, fades & iZotope MBIT+ dither/64-Bit SRC resample)->TLH (flac@8/ffp)  

Recorded, transferred and seeded by B Crupi

Taper: mott77

paf2018-07-20.peach.aud.flac.16-44

Source:

Oktava MK-012s M/S & Rode N5s > Sound Design MixPre 10T (24-48)

Lineage:

SD> WaveLab Pro 9.5 > Flac 16-44

Taper Notes:

View NotesPlease support bands and venues that allow taping.

Taper: Steven Weld

philleshtfb2018-07-20.neumann_skm150.sunboy.flac16

Source:

Neumann KM 150's>GAKables xlr>Lunatec V2>GAKables xlr>Apogee Mini-Me@24/48>AES/EBU>Sound Devices 722 @24bit/48kHz

Lineage:

SD722 master file @24bit/48kHz>firewire>Sound Forge Pro 12.1>CD Wave v1.98(tracking)>FLAC16 via TLH v2.7.0(level 8), tag w/Tag Scanner6.0.30, ffp & md5-TLH

Taper Notes:

View Notes9:15 - 11:30 pm time slot (6th)

Location: box just behind mixer enclosure, "OTS", 10 ft left of ctr.

Mic config:  8" stereo bar, Rycote INV-6 shocks, DPA UA0896 screens, Large Manfrotto air-cushioned stand @ 11ft(bungee/taped to rail) ~

Source: Neumann KM 150's>GAKables xlr>Lunatec V2>GAKables xlr>Apogee Mini-Me@24/48>AES/EBU>Sound Devices 722 @24bit/48kHz
        
Transfer,editing,mastering & conversion: Sound Devices 722 master file @24bit/48kHz>firewire>Sound Forge Pro 12.1>CD Wave v1.98(tracking)>FLAC16 via TLH v2.7.0(level 8), tag w/Tag Scanner6.0.30, ffp & md5-TLH

Notes: ~ S.F. 12 (normalize to 0.08db, fades, resample highest quality w/ anti-alias filter, POW-r #1 dithering to 44.1/16) ~
~ Apogee - soft limit on ~
~ Editing performed in 24bit/48kHz realm ~
~ Recording, transfer, editing, mastering & conversion by Steven Weld ~
~ Many Thanks to Phil Lesh TFB & crew & the venue crew & security for allowing us to record and share the music ~

Taper: Chris LaPorte

PAF2018-07-20.Neumann184

Source:

Neumann SKM184 > Sound Devices MixPre3 @24bit/48Khz

Lineage:

SD Card > Adobe Audition > CD Wave > Trader's Little Helper

Taper Notes:

View NotesPhil and Friends
July 20th, 2018
Scranton, PA
Peach Festival


Neumann SKM184 > Sound Devices MixPre3 @24bit/48Khz
OTS, DFC, 11ft high, PAS
SD Card > Adobe Audition > CD Wave > Trader's Little Helper

Adobe Audition: convert to 16bit/44Khz
CD Wave: Tracking
TLH: MD5, FLAC, FFP

* w/ Karl Denson on flute