11
2005
Sources
Taper: Wiz + Craig Taraszki
3:03:59
SBD
Taper:
Wiz + Craig Taraszki
Transferrer:
Wiz + Craig Taraszki + Stitt
SHNID:
phill2005-11-22_DTS
Source:
DTS 5.1 Matrix = SBD: DSBD + AUD: Source: Schoeps mk4 (din, 6'stand, fob, roc)> kc5> cmc6> Lunatec V3 (24/96)>
Lineage:
Transfer: PDAudio-CF> iPaq 3835 (Live2496, Addonics Pocket ExDrive); Wave Lab 5 (fades, patch s1t01^ & s2t01^^), CDWave (tracks)
Taper Notes:
View Notes^Phil plays Big Brown, *1st time played Phil Lesh, Chris Robinson (vocals, guitar) Larry Campbell (guitar, mando,violin, ps, etc) John Molo (drums), Mookie Siegel (keys) Barry Sless (guitar+pedalsteel) Matrix: DSBD and AUD tracks mixed in Sony Vegas by Stitt ([email protected]) DTS: Track 1 = DSBD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Forward Track 2 = AUD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Backward Track 3 = DSBD cutoff at 116kh for LFE (same levels as Tracks 1 & 2) Surround Master = -2.2 across the board Mono Channels output at 16/44 DTS encoded with Surcode DVD DTS More On DTS: Today's audio standards are moving towards multi-channel sound, like DTS and Dolby Digital. While the Audio-CD standard (Red Book) hasn't changed to accommodate these new sound formats, it is still possible to go around the specification and to put a 5.1 surround recording on a regular Audio-CD. To play a DTS-Audio-CD you must connect your DVD/CD player via a digital cable (optical or coaxial) to your DTS Dolby-Digital receiver. It is not 100% sure that your receiver will recognize a DTS-Audio CD, so the first time you're trying to playback a DTS-Audio-CD you must do a test to determine if it can. Begin with the volume very low, start the disc and rise the volume gradually. NEVER listen to a DTS-Audio-CD through the analogue audio outputs of your CD/DVD player. Burning Instructions Burn them the absolute same way as you would burn any normal Audio-CD from .flac files. Make sure you mark this as a DTS CD disc that's not for playback in an Audio-CD player, as the digital noise will be at full volume level and speaker damage could result. There is a DTS decoder for Winamp at http://files.digital-digest.com/downloads/files/playback/in_dts.zip I've found it works best when using the DirectSound output
Taper: Wizard + Craig Taraszki
3:03:59
SBD
Taper:
Wizard + Craig Taraszki
Transferrer:
Wizard + Craig Taraszki + Stitt
SHNID:
phil2005-11-22_Matrix
Source:
Matrix= DSBD (Mixed and Mastered by Wiz) + Source: Schoeps mk4 (din, 6'stand, fob, roc)> kc5> cmc6> Lunatec V3 (24/96)>
Lineage:
Transfer: PDAudio-CF> iPaq 3835 (Live2496, Addonics Pocket ExDrive); Wave Lab 5 (fades, patch s1t01^ & s2t01^^), CDWave (tracks)
Taper Notes:
View Notes^Phil plays Big Brown, *1st time played Phil Lesh, Chris Robinson (vocals, guitar) Larry Campbell (guitar, mando,violin, ps, etc) John Molo (drums), Mookie Siegel (keys) Barry Sless (guitar+pedalsteel) Matrix: DSBD and AUD tracks mixed in Sony Vegas by Stitt ([email protected]) Stereo PCM Mixdown: Set 1 tracks at 0, master output levels at -1.7 db Set 2 tracks at -1.5, master output levels at -2.2db There also exists a DTS 5.1 Surround version of this Matrix