Bands
Featured
Bands
2011
Sources
Source 1 of 4
2:52:40
SBD
Rating:
10.00 / 1 rating
SHNID:
furthur2011-10-07.sbd.official.116391.flac16
Source:
Official Soundboard
Taper: TT
2:57:18
SBD
Taper:
TT
Transferrer:
TT
SHNID:
furthur2011-10-07.mkh8040.tt.116377.flac16
Source:
Sennheiser MKH8040 (DINa) -> Aerco MP-2 -> Sony M-10 (24/48k) Location: right of SBD, front of taper's section, mics mounted to stand at about 9 ft.
Lineage:
M-10 -> MacBook -> GarageBand (conversion to 44.1k, light EQ, level adjustment and fades, export to AIF format/16BIT) -> Fission to split tracks -> Xact (encode to FLAC, align on sector boundaries)
Taper: Russ Cansler
2:54:03
Taper:
Russ Cansler
Transferrer:
Russ Cansler
SHNID:
furthur2011-10-07.pzm.russjcan.116343.flac16
Source:
Hat Mounted Realistic PZM's with Sony PCM-M10 @ 24/96
Lineage:
Micro SD Card > Audacity > R8brain > CDWave > TLH
Taper: Pat Myers, DATPAT,Mobiltracks, U-89i's
2:50:42
Rating:
10.00 / 8 ratings
Taper:
Pat Myers, DATPAT,Mobiltracks, U-89i's
Transferrer:
Pat Myers, DATPAT,Mobiltracks, U-89i's
SHNID:
furthur2011-10-07.neumann-u89i.myers.116306.flac16
Source:
Nuemann U-89i's-V3-Ad2k-Mt 2496
Taper Notes:
View NotesMic's ran directly behind board. There was a huge cluster of speakers in the back and though the original taping section wasn't that far off center i figured i'd give the back a shot especially because not only would i be on center i would catch a little boost from the relay speakers. 1st set i ran the mic's at about 12-13 feet high so the relay stacks were in full effect. i got a little worried that i was capturing to much of the stacks so i raised it another 18". Well apparently my original height was fine and in raising it i loss the added boost from the Line array's relay's but still got the added boost from the hugh 10-25k watt sub below the array's. The 2nd night i went with the original height and the whole show was made at that location.