Relisten

1:01:08

SBD

Taper:

Allyn Halsey

SHNID:

Dangermuffin2012-12-07.matrix.CK1X.sbd.flac16

Source:

SBD + AKG CK 1X > Lunatec V2 > Tascam 680

Lineage:

680 > audacity (tracking, flac encoding) > xACT

Taper Notes:

View NotesRECORDING NOTES:  Lots of issues to start off this set.  Came down to lack of back up cables and adapters.  Had to use RCA out of the V2 since I was using my one set of XLRs to get the mic feed onstage from the soundboard to the 680.  Apparently I had lost one of my 1/4" TS adapters for the RCA to plug into the 680 so tried a TRS adapter.  No go.  Decide to just use my one TS adapter to get at least one good channel from onstage.  Then realized the SBD mix is 90% mono anyway, so pull one of the TS adapters from the soundboard feed to get the second onstage channel.  Onstage is  now up and running.  New problem, the one board feed channel looks a little funny.  Check the connection and its not stable at all.  The XLR adapter didn't couple well, and turned out to be pure buzzing until I giggled it a bit, then it smoothed out.  Note to self, buy more cables and adapters.