Bands
Featured
Bands
Sources
Taper: taperjoe
1:27:10
SBD
Taper:
taperjoe
Transferrer:
taperjoe
SHNID:
cracker2013-12-31.mtx.flac24
Source:
Source 1: SBD (Yamaha CL5) > Sound Devices 722 (24/48, slave via C-link) + Source 2: Sennheiser e914's (@ FOH, rear left corner of room) > Sound Devices 722 (24/48, 40 Hz HPF @ 12 dB/oct., master via C-link)
Lineage:
CF cards > Logic Pro (align sources*, slight EQ to SBD source, mix) > 24/48 .wav > Audiogate (fades, tracking) > xACT (flac 8 w/ tags)
Taper Notes:
View Notes** 24-bit / 48 kHz recording ** * The SBD source was cut into 6 pieces about 15 minutes each & the pieces were used in aligning the sources, which drifted about 100 ms from each other by the end of the set. I can offer no good explanation for this, but it sounds fine now.. Recorded, transferred, & mixed by taperjoe. Thanks to Bob M. for the 2nd 722! Thanks to morst for the setlist help! Double bill with J.C. Brooks & The Uptown Sound Enjoy!!
Taper: taperjoe
1:27:10
SBD
Taper:
taperjoe
Transferrer:
taperjoe
SHNID:
cracker2013-12-31.mtx.flac16
Source:
Source 1: SBD (Yamaha CL5) > Sound Devices 722 (24/48, slave via C-link) + Source 2: Sennheiser e914's (@ FOH, rear left corner of room) > Sound Devices 722 (24/48, 40 Hz HPF @ 12 dB/oct., master via C-link)
Lineage:
CF cards > Logic Pro (align sources*, slight EQ to SBD source, mix) > 24/48 .wav > Audiogate (fades, tracking, dither/re-sample to 16/44.1) > xACT (flac 8 w/ SBA & tags)
Taper Notes:
View NotesCD version * The SBD source was cut into 6 pieces about 15 minutes each & the pieces were used in aligning the sources, which drifted about 100 ms from each other by the end of the set. I can offer no good explanation for this, but it sounds fine now.. Recorded, transferred, & mixed by taperjoe. Thanks to Bob M. for the 2nd 722! Thanks to morst for the setlist help! Double bill with J.C. Brooks & The Uptown Sound Enjoy!!